AT-OME-MS52W
100
Configuration and Management Interfaces
This page contains a
WiFi
and
Ethernet
tab. Use the settings, under these tabs, to connect the AT-OME-MS52W
to a network or wireless Access Point (AP). Refer to the IT Network Deployment Guide for detailed information on
configuring the AT-OME-MS52W in various network environments.
Hostname
The name assigned to the AT-OME-MS52W. This name can be changed, if desired. Refer to
for more information.
Administration > Networking page
General
Ethernet
MAC Address
Displays the MAC address of the AT-OME-MS52W.
Mode
Click this drop-down list to select the desired IP mode.
Setting
Description
DHCP
Select this option to have a DHCP server (if available) assign an IP address to the AT-
OME-MS52W.
Static
Select this option to enter a specific IP address. When set to
Static
mode, the subnet
mask, gateway, and DNS servers can be specified.
Factory Static
Select this option to use the factory-default wired network settings. In this mode, only
the DNS Server fields can be modified. The
IP Address
,
Network Mask
, and
Gateway
fields will be set to the following values:
•
IP Address = 192.168.1.254
• Network Mask = 255.255.0.0
•
Gateway = 192.168.1.1