AT-UHD-CLSO-840
11
HDMI IN
HDBaseT IN
R
L
1
R
L
2
7
6
8
2
1
3
4
4
3
2
1
5
R
L
3
R
L
4
R
L
1
R
L
2
R
L
3
R
L
4
HDBaseT OUT
LAN
ON
OFF
PWR 100-240VAC 50/60Hz
RS-232
HDMI OUT
AUDIO IN
AUDIO OUT
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
RX TX
AT-UHD-CLSO-840
FCN
CANCEL
EDID
INFO
POWER
ENTER
5
6
7
8
1
2
3
4
3
5
6
1
2
4
7
10
8
9
Rear
1 HDMI IN
Connect up to five 4K UHD source devices to these ports using HDMI cables.
2 AUDIO IN
Connect up to four analog audio sources to these ports using the included 5-pin captive screw blocks. Refer to
for wiring information. These analog audio ports provide the option of replacing
the HDMI source audio, and embedding analog audio on the outputs.
3 HDBaseT IN
Connect up to three PoE-compatible transmitters, such as the AT-UHD-EX-100CE-TX, to these ports using
Ethernet cable.
4 AUDIO OUT
Connect these ports to the analog inputs of a DSP, audio amplifier, or other output device, using the included
5-pin captive screw blocks. Refer to
5 HDMI OUT
Connect up to two local displays to these ports using HDMI cables.
6 HDBaseT OUT
Connect up to two PoE-compatible receivers to these ports using Ethernet cable.
7 ON/OFF
Press this button to power-on or power-off the matrix.
8 LAN
Connect an Ethernet cable from this port to the Local Area Network (LAN).
9 RS-232
Connect an RS-232 control device to this port using the included 3-pin captive screw block.
10 PWR 100-240VAC 50/60Hz
Connect the included power cable from this receptacle to an available AC power outlet.
Panel Description
