Panduit Atlona AT-OME-ST31A, Manual, Page: 29 / 54

AT-OME-ST31A 29
Configuration and Management Interfaces
Setting Description
Baud rate Sets the baud rate. The following options are available: 2400, 9600, 19200,
38400, 56000, 57600, 115200.
Data bit Sets the number of data bits used to represent each character of data. The
following options are available: 7 or 8.
Parity Sets the parity bit, which can be included with each character to detect errors
during the transmission of data. The following options are available: None,
Odd, or Even.
Stop bit Sets the stop bit. Stop bits are sent at the end of each character, allowing
the client to detect the end of a character stream. The following options are
available: 1 or 2.
RS-232 Parameter Setting
This section allows the RS-232 settings to be specified for HDBaseT and Console.
• RS232 over HDBaseT
If the AT-OME-ST31A is connected to a device such as the AT-UHD-EX-100CE-RX-PSE, the drop-down list
boxes will be disabled and the HDBaseT baud rate will be locked at 115200. If the AT-OME-ST31A is connected
to another HDBaseT device, such as the AT-UHD-CLSO-824, each of these drop-down list boxes can be set
to the baud rate of the HDBaseT RS-232 settings on the corresponding device. Refer to Solution Setup and
Configuration Guide (page 35) for more information.
• RS232 Console
When the AT-OME-ST31A is connected to a device, such as the AT-HDVS-200-RX, the drop-down list boxes will
be disabled and the HDBaseT baud rate will be locked at 115200.
• Save
Click this button to commit all changes.
RS-232 Page