Q: After doing a firmware update the unit is still not operating properly.
A: Try doing a System Reset. Once the unit has re-booted, if this does not fix the problem unplug
everything (power, category cable and HDMI) from the HDVS-RX for 10 seconds. Reconnect
everything and wait until the video returns. Test to see if the unit is operating properly. Note: Do
not use Windows 8.1 or Mac to do an update, if this is done simply re-load firmware with the
proper operating system
Q: I have multiple AT-HDVS-RX but only have one working power supply, is there a
workaround for this?
A: You may use 2 AT-HDVS-RX hooked up to 1 power supply. It will work fine.
Q: How do I get a separate audio feed to my AVR or sound system via HDVS?
A: You may use the captive screw audio output port of AT-HDVS-RX to send a separate audio
signal to your AVR or sound system.