4
Installation Guide
AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
The AT-HDVS-200-TX / AT-HDVS-200-TX-PSK includes four mounting brackets and eight
mounting screws, which provides the option of mounting each unit to any flat surface.
The mounting procedure is the same for both the transmitter and receiver.
1. Position one of the mounting brackets, as shown below, aligning the holes on the side of the
enclosure with one set of holes on the mounting bracket.
2. Use the enclosure screws to secure the mounting bracket to the enclosure.
3. Repeat the above steps to attach the second mounting bracket to the opposite side of the
unit.
PW
HDMI
INPUT
DISPLA
Y
v
v
AT-HDVS-200-TX
VOL
HDMI IN 1
VGA IN
AUDIO IN
1
2
VGA
4. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall
surface, a #6 drywall screw is recommended.
NOTE:
Mounting brackets can also be inverted to mount the unit under a table
or other flat surface.
PW
HDMI
INPUT
DISPLA
Y
v
v
AT-HDVS-200-TX
VOL
HDMI IN 1
VGA IN
AUDIO IN
1
2
VGA
Mounting Instructions
Included screws