AT-HDVS-150-TX / AT-HDVS-150-TX-PSK
19
1. Click the
Display Mode
drop-down list, in the control software.
2. Select the desired mode. In this example,
DispSW AVSW
is selected. This will instruct the display to “follow”
the power-on / power-off state of the source device.
3. Refer to the table below, for a list of available settings and a brief description.
4.
Refer to the AT-HDVS-150-RX User Manual for more information on other settings.
Programming the AT-HDVS-150-RX
Controlling Display Power
Once the control software is running, it can be used to program the AT-HDVS-150-RX to affect the behavior of the
connected display. For example, the display can automatically be turned on, when the source device is turned on.
Conversely, when the source is turned off (or disconnected), then display is automatically turned off.
Setting
Description
DispSW AVon
Turns the display on or off; the source is unaffected.
DispSW AVSW
Display switches on/off, source audio/video signal switches on/off.
AV SW
Display is always on, source audio/video signal switches on/off
Always ON
Pressing the DISPLAY button will have no affect on the display or the source.
Solution Setup and Configuration Guide
