3
Installation Guide
AT-HDVS-150-KIT
HDBaseT IN
FW
DC 48V
+
HDMI OUT
AUDIO OUT
L
R
RX TX
RS-232
MENU
V
V
PW
LINK
HDBaseT IN
FW
DC 48V
+
HDMI OUT
AUDIO OUT
L
R
RX TX
RS-232
MENU
V
V
PW
LINK
1
2
3
7
4
5
6
9
10
8
Front
Rear
Panel Descriptions - Receiver
1
HDBaseT IN
Use a category cable to connect an
HDBaseT PoE transmitter to this port.
2
FW
Connect a mini USB type-B cable to this
port to update the firmware.
3
DC 48V
Connect the included 48V DC power
supply to this power receptacle.
4
HDMI OUT
Connect an HDMI cable from this port to a
display or other sink device.
5
AUDIO OUT
Connect the included 5-pin captive screw
connector from this port to an audio
amplifier.
6
RS-232
Connect the included 3-pin captive screw
connector from this port to an RS-232
device.
7
PW
This LED indicator will glow bright green
when the scaler is powered.
8
LINK
This LED indicator will glow bright amber
when a link is established between the
transmitter and receiver.
9
MENU
Press this button to display the built-in
On-Screen Display (OSD).
10 Cursor buttons
Press these buttons to select items within
the OSD.
