AT-DISP-CTRL
21
Device Operation
Password Management
The AT-DISP-CTRL allows the administrator password to be changed. The password applies to both the web server
and Telnet sessions. Note that the Username cannot be changed.
1.
Login to the web server. Refer to
Introduction to the Web Server (page 27)
.
2. Click
Config
in the menu bar.
3. Click the
Old Password
field and enter the current password.
4. Enter the new password in the
New Password
field.
5. Retype the new password in the
Confirm New Password
field.
6.
Click the
Save
button to commit changes. To login with the new username, click
Logout
in the upper-right
corner of the screen, then enter the new password on the
Login
page.
NOTE:
Password fields will always be masked for security purposes.
