2
Installation Guide
AT-AVA-EX70-2PS-KIT
DC 5V
HDBaseT IN
HDMI OUT
AT-AVA-EX70-2PS-RX
PWR
LINK
FW
DC 5V
HDBaseT IN
HDMI OUT
AT-AVA-EX70-2PS-RX
PWR
LINK
FW
DC 5V
HDBaseT OUT
HDMI IN
AT-AVA-EX70-2PS-TX
PWR
LINK
FW
TEST
DC 5V
HDBaseT OUT
HDMI IN
AT-AVA-EX70-2PS-TX
PWR
LINK
FW
TEST
Panel Descriptions
HDBaseT LED Descriptions
1
TEST
Quick and easy test for category cables.
Use the button to start the test and the
LED to determine pass or fail.
2
FW
Connect a micro-USB to USB-A type
cable from this port to a computer, to
update the firmware.
3
POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
4
DC 5V
Connect the included power supply to this
port.
5
HDBaseT OUT
Connect an HDBaseT cable from this port
to the
HDBaseT IN
port on the receiver.
6
HDMI IN
Connect an HDMI cable from a source to
this port. e.g. HDR BluRay Player
7
FW
Not used at this time.
8
POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
9
DC 5V
Connect the included power supply to this
port.
10 HDBaseT IN
Connect an HDBaseT cable from this
port to the
HDBaseT OUT
port on the
transmitter.
11 HDMI OUT
Connect an HDMI cable from this port to
an HDMI display.
a
Green LED
When a category cable is connected
and receiving signal this LED will be
illuminated. If no cable or signal is being
received, the LED will be off.
b
Yellow LED
This LED displays the status of the
HDBaseT firmware. When the LED is
blinking slowly, the firmware is good. If
the LED is blinking rapidly or off, there
is no firmware or the firmware has been
corrupted.
9
5
b
b
6
10
11
4
a
a
8
3
7
2
1
