Doc id: ENG_OMM_SL400_SL450_P01
25/37
© Pandrol AB
6.7 Actual spreading width
The desired spreading width can be adjusted. The sleeper layer should hold no sleepers
when adjusting the width.
Fig 15. Actual spreading width
To adjust the sleeper distance:
1. Release the screw and activate
the hydraulic function. Spread the
sleeper layer to desired position.
2. Move the end position sleeve to
its end position according to
Fig. 15. Fit and tighten the
lockong screw in most suitable
hole.
WARNING!
It is important to setup and adjust the sleeper layer in order to guarantee
the right performance.
