1.4.5 Machine in Operation
Special precautions must be taken to ensure that operation of the machine will not result in
severe injury and/or damage to the equipment.
To avoid accidents, make sure no one is in the vicinity of the machine before operation is started.
1.4.6 Operator Leaves the Machine Unattended
When the operator leaves the machine unattended, the machine must always be parked
horizontally on the ground, or when it is still on the track with the work head onto ballast or the
sleeper. This is to ensure that the machine doesn’t fall over or run away along the track.
1.5 Qualified Personnel
The CD200 is only to be used by trained personnel, thoroughly familiar with and trained in general
railway workmanship. The equipment should be operated according to the conditions and
standard regulations applying to the track they are working on.
The equipment must be serviced, maintained, or in any way modified only by trained personnel,
who are familiar with the Operation & Maintenance Manual and have received training and
information from Pandrol AB.
In order to avoid personal injury and/or material damage, everyone involved with assembling,
starting-up or overhaul must possess relevant knowledge of the following
•
The automation technology sector
•
Dealing with dangerous voltages
•
Using standards and regulations, accident prevention regulations and regulations concerning
special ambient conditions (e.g. areas potentially endangered by explosive materials, heavy
pollution or corrosive influences)..
WARNING!
Live current - risk for damage on equipment and/or
people
•
Touching parts that are subject to high voltage may cause grave damage to
health
•
All maintenance and service on the electric or hydraulic system is to be carried out
by qualified personnel
WARNING!
1.4.4 CD200 Electric
The machine is equipped with an electric motor. The power connected to the machine
must be as specified in the technical data. Any other can cause cruzial damage to the
motor, machine and the operator.
The electric cable connected to the machine must be assembled by an electrician and
not be damaged in any way.
The cable must be checked on a daily basis to ensure no damage is done.
Doc id: ENG_OMM_CD200_P05
8/52
© Pandrol AB