3.7.3 Work Head Lifting Mechanism e-CLIPS
The work head is in the operating position (low) when the dead-mans-handle is not pressed.
When it is pressed in towards the handle bar, the lifting cylinder (2) will extract to its full length
and the work head will rise above the clips. In this position CD200 can easily be pushed towards
the next sleeper.
This mechanism is also used to adjust the machine to different rail heights and also to make sure
the work head is parallel to the rail.
Item Description
Item Description
(1)
Height adjustment knob
(3)
Support wheel
(2)
Lifting cylinder
(4)
Parallelity adjustment knob
Table 13
(1)
(2)
(3)
Fig. 15
(4)
Doc id: ENG_OMM_CD200_P05
23/52
Doc id: ENG_OMM_CD200_P05
© Pandrol AB