Pandora DXL
Hyundai Solaris (2017-)
This instruction has the status of a recommendation
[email protected]
pandorainfo.com
6
Connecting circuits for remote start
There are 2 options for remote start connection:
ignition switch
and
fuse box
.
Option №1. Ignition switch connection.
Wires of ignition switch connector:
White
+12V
Starter
Pink
+12V
Ignition 1
Blue
+12V
Ignition 2
Red
+12V
ACC
Green
+12V
Power
Black
+12V
Power
Option №2. Fuse box connection.
Remote start circuits can be also connected in the fuse box. The connection is performed to the wires
of connectors from the engine side. Wire colors are the same as the wires in the ignition switch.
Clutch pedal pressing simulation (for cars with manual transmission)
Cars with manual transmission require to simulate clutch pedal pressing during remote start
procedure. To do this, apply +12V to pink wire of the clutch pedal pressing detector connector at the
moment of starter rotation (use “Starter” channel).
Ignition switch connector
Remote start circuits in the fuse box
Pink (+12V)
Ignition 1
White (+12V)
Starter
Blue (+12V)
Ignition 2
Red (+12V)
ACC
Pin assignment of the ignition switch connector
View from the wires side
+ 12V
Ignition 2
Starter
Ignition 1
+ 12V
ACC