Pandora DXL
Hyundai Solaris (2017-)
This instruction has the status of a recommendation
[email protected]
pandorainfo.com
13
System settings
Apply the next settings in Pandora Alarm Studio:
1.
Remote engine start logic is configured as standard start logic of analog key ignition switch.
2.
Enable “Use LIN for Bypass of KIA/Hyundai configuration with Start/Stop button and key (the
new version of immobilizer)” item in the Original immobilizer bypass settings.
Menu
(number, name)
Submenu
(number, name)
Function
(number, name)
Value
2. Automatic start
2.3. Original
immobilizer bypass
2.3.5. Use LIN for bypass
on KIA, HYUNDAI
KIA/ HYUNDAI
Start/Stop and
key (new
immobilizer
version)
3.
Engine operation control configuring.
If the engine operation control is performed by tachometer via CAN, this function
Menu
(number, name)
Submenu
(number, name)
Function
(number, name)
Value
2. Automatic start
2.1. Automatic
start settings
2.1.3. Control via
tachometer
Digital CAN
If the engine operation control is performed by generator status, enable “Control according to
battery charge light” item.
Menu
(number, name)
Submenu
(number, name)
Function
(number, name)
Value
2. Automatic start
2.1. Automatic
start settings
2.1.4. Control according to
battery charge light
Enable
4.
Enter programming level 17 or 21 (it depends on the system), LED indicator will be lit green.
Switch on the ignition. The system will confirm correct connection (EMS COM wire) with green
LED indicator flashes for several seconds. Press VALET button to save.