Pando GRUPO PRO Series, Installation Manual

Page: 15 / 44

INOXPAN S.L.
EN
– English
The symbol on the product or its packaging indicates that this product
cannot be disposed of like normal domestic waste. The product must be
handed over at a collection point for recycling electrical and electronic
equipment. If you ensure that this product is correctly disposed of, you will
help to avoid the possible negative environmental and public health effects
that could arise from incorrect disposal. For more detailed information about
recycling this product, please contact your city authorities, the domestic
waste service or the establishment where you purchased it. This electrical
appliance is marked in compliance with European Directive 2002/96/EC on
electrical and electronic appliance waste (WEEE).
Firstly, we would like to thank you for your confidence in our firm when you chose a
Pando extractor hood.
This manual and its annexes are a guide for the correct installation, usage and
maintenance of your new Extractor Hood.
To learn everything about your hood, we recommend you read these instructions
carefully from beginning to end and keep them for future reference.
Before starting the installation process read with care this installation manual
and the attached user's manual, There are also instructions for the correct
installation of the product.
Installation should only be carried out by qualified professionals, professional
installers or the official technical service.
The manual or installation guide must be
read with care before starting the installation process.
When opening the packaging, check that all the components are in perfect state and
all the accessories are present. If this is not the case, contact the dealer and do not
install.
Once installed, any damage to the exterior such as scratches, dents,
stains, etc. will not be covered by the guarantee.
The manufacturer will not be held liable for any possible inaccuracies due to printing or trans- cription errors
in this manual The manufacturer reserves the right to incorporate modifications considered useful or
necessary into the products, which will not alter their essential functional and safety characteristics.
EN - INTRODUCTION