Quik & Quik GT450 Maintenance Manual
29
th
March 2007
Issue 1
Page 4 of 54
NOTICE
This product has been manufactured for use in a
reasonable and prudent manner by a qualified operator.
The minimum qualification for flying this aircraft is a
formal certificate or license following successful
completion and assessment of the BMAA flexwing
microlight syllabus, Sport Pilot Certificate for Weight-Shift
Control or equivalent, or under authorization from a
qualified Instructor whilst training for your License or
certificate. In addition, it is your personal responsibility to
ensure that you are qualified to fly in the state/country
where you intend to operate the aircraft.
For your personal safety, the safety of others and the safe
operation of the aircraft, it is very important that this
operator’s manual is read in full before operating or flying
the aircraft for the first time, and that the relevant sections
are understood before any trimming or maintenance work
is undertaken. Should you not understand any of the
Aviation terms to be found in this manual, then ask your
instructor for clarification.
If you have just acquired this aircraft then it is important
that you register as the new owner/operator with your
nearest P&M Aviation Distributor, or with P&M Aviation
direct at the following address:
P&M Aviation Ltd
Unit B,
Crawford St,
Rochdale
Lancashire
OL16 5NU
Great Britain
www.pmaviation.co.uk
Failure to register will mean that you may
not get important safety information issued
by the company in support of its products.
WARNING
!
