background image

32

Gets Extra 

 

 

OPERATION 

 

This game has two adjustable play modes. One is the free play mode, and the other one is coin play 

mode. When the machine is in free play mode, after pressing the reset button, no coin is required to start 

the game. The machine will be in play mode continuously. When the machine is in coin play mode, it can 

be in one of the following six modes: 1) Attract Mode,    2) Test Mode , 3) Claw Carriage Test Mode,    4) 

Game Play Mode,    5) Error state,    6) Prize-Out Mode. Please refer to the Flow Chart below for details:   

   

 

 

 

 

 

 

 

 

 

TURN ON THE POWER   

Before turning on the power, please check the plug and cord, and make sure that the game is set to the 

proper voltage. 

GAME PLAY MODE 

When the Game is started, the LCD on the console display the time and credit the player has. There is 

also MUSIC going with this. 

ATTRACT MODE 

In ATTRACT MODE, Press the “MENU” button on the KEYPAD and the game will enter into TEST MODE. 

Insert Coin, and the machine will enter into GAME PLAY MODE.     

TEST MODE 

Test whether whether the lights, claw carriage and music are normal. When machine is in ATTRACT 

MODE, press the “MENU” button, music will stop and the game will enter into “TEST MODE”.     

 

Te
st

 c

o

m

p

le

te

d

 

System Error 

Game ends 

Insert  coin 

Press Menu button to  
start testing 

Press Reset    button    on    main
board after clearing t he    error

 

System Error 

Play Mode 

Turn on Power   

Attract Mode 

Test Mode

 

Error Mode 

Summary of Contents for AS1840














Reviews: