32
″
Gets Extra
9
setting ( from main menu items).
(2). Game Setting
At current menu, press ENTER into the next menu, display screen shows as below.
Coins Per Credit
Attract Mode
Alarm Sound
Game Time
Use the UP or DOWN button to change the data of the menu items.
For example, at attract state, press ENTER into next menu, the first line of display screen
shows Coins Per Credit, and second line shows 2 Coin/Credit, it means insert 2 pcs coin can
play one game. Press Down, then the second line shows 3 Coin/Credit; and shows 1
Coin/Credit by press UP. Press EXIT button to quit, then it will automatically save the
parameters. All parameters can set up in this way.
The following is the description of each menu item:
1. Coin Per Credit (XX Coin/Credit,from 1 to 10)
Machine set 1coin/game, then screen shows 1Coin/Game, it means insert 1 Coin player can
play 1 game. Machine set 10coin/Game, then shows 10Coin/Game, it means play insert 10
Coin can play 1 game.
2. Attract Mode (music sound once each X Minute(from 0 to 10,0 means no attract music)
3. Alarm Sound (from 0 to 600 seconds, 0 means no alarm sound)
4. Game time (from 30 to 90 seconds)
5.
Award play needs insert coin(from 1-10,1 means no award play)
6. Avg. Win Ratio (Average XX plays Win one prize,5-250)
7. LCD Screen Adjust (suggest using factory setting, number from 32 to 64)
8、Vending Mode(Enable or Disable)
9、Maximum Catch Times in the Vending mode(1--3)
10. Ball Out Enable (allow prize ball out or not. If machine without ball out mechanism, the
optional should be disabling, otherwise ball sw error will be occur)
(3). I/O Test
At current menu, press ENTER into next menu, display screen shows as below.
Test All Inputs
Test All Outputs
Test Audio
1. Test All Inputs (showing all input terminal, black means valid, blank invalid. For
example, the input port of up button on control stand is 8, pressing up button, black plat shows
on the right of 8, then it means up button input valid. It shows blank plat while releasing up
button, means input invalid. In the way of testing input can check if all wires connect well.)
2. Test All Outputs (showing all output terminal, black means valid, blank invalid. For
example, the output port of up button’s indicator light on control stand is 3, press ENTER,
indicator light of up bottom on, and black plat shows on the right of 3, then it means output
valid. Press ENTER one more time, then light off, and blank plat shows on right of 3, means
output invalid. In the way of testing output can check if all wires connect well.)
Note: port 0 and 1 is for stopwatch output and narrow pulse output, press ENTER button,
theses two ports may not have black plat on display, but the stopwatch will beat one time, it
