English
28
Note
:
The test leads have an inherent resistance of approx. 0.1 - 0.2Ω, which
influences the measurement. To get a more accurate result in the range
up to 200 Ω, the test leads should be shorted before the actual
measurement and their resistance value should be subtracted from the
value of the actual measurement. Above 1MΩ the display may fluctuate
for a few seconds before the exact value is displayed.
1.
Set the rotary switch to the
- Position
2.
Attach the pin-plug of the black test lead to the COM-jack and the pin-plug
of the red test lead to the multi-function jack.
3.
Connect the test prods of the leads to the resistance or circuit to be
tested. To avoid influence disconnect the resistant to be tested from the
circuit.
4.
Once the reading stabilizes, read the value. Use the HOLD function if the
reading is difficult to read.
9.
Maintenance
Only authorized service technicians may repair the instrument.
Note
:
If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.
Summary of Contents for PAN Micrometer
Page 1: ...PAN MICROMETER...
Page 2: ...2 Fig 1...
Page 179: ...Polski 179 B dy i pomy ki drukarskie zastrze one Wiede Czerwca 2020...
