PANCONTROL PAN IR-T650, Manual

Page: 23 / 178

EN 10
LOCK Function
The LOCK function enables temperature to be measured continuously. Press
the UP button to turn it on or off. Press the test button (trigger) to confirm the
change.
HAL Function
The HAL function enables the setting of the minimum and maximum alarm.
Press the UP or DOWN button to turn it on or off. Press the test button
(trigger) to confirm the change.
9. Maintenance
Only authorized service technicians may repair the instrument.
Note : If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
Changing the battery(s)
Replace the battery(s) when the battery symbol or BATT is displayed on the
LCD.
1. Open the battery compartment.
2. Replace the battery. Mind the correct polarity.
3. Close the battery compartment.
4. Disposal of the flat battery should meet environmental standards.
5. Remove the battery if the device is not used for a long time.