PANCONTROL PAN 188, Manual

Page: 40 / 217

EN 17
Capacity measurement
1. Set the rotary switch to the position
2. Attach the pin-plug of the black test lead to the COM-jack and the pin-plug
of the red test lead to the general jack. (4.3)
3. For capacitors with known polarity connect the red test lead with the
anode and the black test lead with the cathode. Once the reading
stabilizes, read the value.
Temperature measurement (Type K temperature probe)
1. Set the rotary switch to the position TEMP
2. Connect the device to the K-probe. Observe the correct polarity!
3. (Red: TEMP, Black: COM)
4. Connect the temperature probe to the device to be tested wait a few
moments
and read the value displayed.
If necessary, use heat conducting paste.
9. Maintenance
Only authorized service technicians may repair the instrument.
If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.
Attention!
Always switch off the appliance and remove the test leads from all
voltage sources before opening the device to exchange the battery or the
fuse.
Changing the battery(s)
Replace the battery(s) when the battery symbol or BATT is displayed on the
LCD.