PANCONTROL PAN 124, Manual

Page: 30 / 244

EN 13
RANGE Function
By pressing the “RANGE“-button you can select the range manually:
Press RANGE as often as needed to get to the desired range. To deactivate this
function press and hold RANGE
MAX Function
displays the highest measured value of fluctuating results. Press MAX again to
clear the value and perform the next measurement.
9. Maintenance
Only authorized service technicians may repair the instrument.
Note: If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.
Changing the battery(s)
Replace the battery(s) when the battery symbol or BATT is displayed on the LCD.
Attention : Remove test leads from any power source and turn the device OFF
before opening the cover!
1. Remove the protective cover and the screws of the battery or fuse
compartment using a proper screwdriver and remove the lid.
2. Replace the battery. Mind the correct polarity.
3. Replace the battery compartment lid and secure the screw.
4. Disposal of the flat battery should meet environmental standards.
5. Remove the battery if the device is not used for a long time.