P
a
n
chromatic
Eumig Mark 8
User Manual
5
www.Panchromatic.co.uk
Place the provided special take-up reel on the rear reel support in such a
way that it is firmly fastened. (The film length indication marks must be
facing toward you).
Wrongly spooled films (contrary to our illustration) must be rewound
twice to correct the error.
Height Adjustment
Raise the projector by the front end of the carrying handle until it is
inclined at the desired projection height. Rotate knob
1
toward the left.
(Support foot slides out.) Rotate knob
1
toward the right. (Support foot
is fastened in position.)
Still Picture Projection
2
Turn the central switch to “still picture" (ev. adjust focusing). A heat
filter protects the film. (The image will be slightly less brilliant.)
Should the shutter cover the gate, turn knob
2
. Turning this knob with
the fingers means that frame will follow frame on the screen as still
pictures.
Reverse Projection
Set the central switch to "Reverse Projection'. The film will now be
shown in the reverse direction. (Make frame line adjustment, if
necessary.)
Film Loop Adjustment
(With projector running in either forward or reverse direction.)
Faulty spicing or badly damaged sprocket holes can cause a shortening
of the film loop either before or after the film gate. (The running noise
becomes louder). Should this occur, the pin
4
should first be raised and
then the key
5
should be pressed. This restores the normal film loop.
