P
a
n
chromatic
Eumig Mark 8
User Manual
4
www.Panchromatic.co.uk
5.
Push light grey film guide towards the lens take it out replace it by
dark grey film guide. (First push in until it comes to a stop, then
push toward the left until the two guide pins click into position.)
Replace the dark grey film pressureplate.
6.
Remove the light grey reel adapter from the front reel support,
and secure it in the projector lid
For Super 8 projection the dark grey parts must be exchanged again for
the light grey parts.
Beforehand, knob
3
must be turned so that red dot is in TOP position
Projection
Splice a sturdy leader strip of ample, length to the beginning of your
film. Make a straight cut through the front end of the film. The cut of a
Super 8 film must pass through a perforation hole, the cut of a Standard
film must pass between two perforation holes. For the faultless
functioning of the automatic film threading facility, the film must be
neither strongly buckled or bent.
1.
Connect the projector to the mains. (The pilot lamp comes on.).
2.
Swing out the reel supports.
3.
Place the full reel on the front reel support. (The perforation must
be facing toward you.)
