PANAVISION PANALUX ALLEGRA C, User Manual

Page: 25 / 48

PRIMARY/CLONE
When selected, ALLEGRA-C™ will
become the primary fixture and a network symbol will be
displayed on the info bar. In this mode, any ALLEGRA-C™
connected to the primary, via the DMX sockets, will copy its
behaviour.
All ALLEGRA-C™ systems in the chain must be set to
the same DMX personality.
The control menu allows selection of dimming curves, output
power, colour gamuts and the priority of control signals.
CONTROL
CURVES
Curve Characteristics
Linear (Default)
In linear mode, 50% equates to half the output, or 1 stop down. 25% is quarter output, or 2 stops down.
Square Law
A square law curve increases the dimming resolution at lower control levels.
S Curve
S Curve provides a finer control at lower and higher levels while offering coarse control (lower resolution) at
medium levels. This dimming curve best emulates a typical incandescent lamp’s dimming abilities.
Tungsten Emulate
Tungsten emulate mode combines square law with greater resolution at lower levels and a warming of the
CCT as the fixture dims. This operates on any CCT start point between 2700K and 3600K (correlating to an
underrun and overrun tungsten bulb). At CCTs outside this range, standard square law is in play.
PANALUX ALLEGRA-C USER MANUAL 25
ISSUE 1.0 | OCTOBER 2023