4
OPERATING PROCEDURES
Notes:
• Transmission using the talk [T] or page [P] button is
allowed for a single headset at a time. A continuous
beep or distorted sound will be heard in the headset
that tries to transmit while another person is operating.
• Distance a headset more than 0.3m (1 foot) from the
order taker, or more than 1m (3 ft) from the center mod-
ule.
●
Preparations
Prior to operating the headset, confirm that the system
setup has been performed for the headset, center module,
and other devices.
1. If necessary, attach the supplied strap on to the head-
set. There are two strap buttons on the headset: one is
at the lower part of the head pad, and the other is
behind the ear cushion.
• Hook the tabs of the strap to the two strap buttons
on the headset.
2. Install a battery to the battery compartment, referring to
BATTERY LOADING & REPLACEMENT.
3. Wear the headset and route the strap behind your neck.
4. Adjust the head pad so that the earphone is placed on
your ear.
5. Rotate and bend the microphone boom so that the
microphone is placed near your mouth.
6. Press the power button to turn on the headset.
A/B
VOL.
A/B
VOL.
q
e
w
A/B
VOL.
