28
Connections
■
Connecting audio output
The receiver can output the audio from the microphones on each channel or the collective
mixed audio from all channels to an amplifier (or mixer).
Connect an external device such as an amplifier to the [CH OUT] or [MIX OUT] connector
on the receiver.
1
Connect the wires to the included Euroblock connectors
Connect the cables to the included Euroblock connector (6-pin) to connect to the [CH
OUT] connector or [MIX OUT] connector of this product. The [CH OUT] connector can
output the audio from two channels through a single Euroblock connector, and can
output the audio from four channels through two Euroblock connectors in the case of
the WX-SR204P.
Antenna 1
Antenna 2
Antenna 8
To AC120 V
60 Hz
electric outlet
LAN cable
Wireless antenna
connectors 1 to 8
Channel output
connectors 1 to 4
MIX output connector
To an amplifier or mixer
Receiver
Wireless receiver
connector
(inside the
connector cover)
memo
Important
Thoroughly connect the Euroblock connector to the receiver.
When connecting amplifiers (or mixers) to individual channels, use the [CH
OUT] connectors on the receiver.
When connecting amplifiers (or mixers) to the mixed output of all channels,
use the [MIX OUT] connectors on the receiver.
PUQX1021YAV6_WX-SR204P_OI_en-fr.indb 28
2022/03/17 10:25:50
