28
Installation
Camera mounting
Installation shall be conducted after turning off each device.
z
Detach the dome cover. (
☞
Page 18)
x
Connect the cables to the camera. (
☞
Pages 23 to 27)
As necessary, use a cable tie (accessory) to assemble the cables.
c
Mount the camera. (The illustration represents the case in which a two-gang junction box is
installed.)
• Fix the camera with 4 screws (M4, locally procured)
FRONT
TOP
EXT I/O
AUDIO
OUT
MIC
LINE IN
10BAS
100BA
12V=IN
4
2
3
1
MONITOR
OUT
N
F
Direction marker for installation
Two-gang junction box
Screws
(locally procured)
Important:
• When tightening the screws, be careful to ensure that the cables does not tangle the cables.
Note:
• For ceiling mounting
"
g
FRONT" of direction marker for installation indicates the center of panning. Adjustment of
lens direction will become easier when the camera is mounted with the "
g
FRONT" marker ori-
ented to the desired shooting area. Refer to the "Adjustment" section (
☞
pages 29 to 33) for
further information about adjustment.
• For wall mounting
The camera shall be mounted with the "
g
FRONT" marker facing upward.
