manualshive.com logo in svg

Panasonic WVCU161C - SYSTEM CONTROLLER, Operating Instructions Manual

Share
Download
Panasonic WVCU161C - SYSTEM CONTROLLER Operating Instructions Manual Download Page 5

5

PREFACE

The WV-CU161C System Controller is designed for one-to-one use with a Combination Camera or WV-RC100/WV-RC150
Receiver that is provided with camera control functions. You can operate the pan/tilt head, lens and patrol play function from
the controller in normal operations. The camera setup upload/download and other functions are also available on the setup
menus. The distance between the camera and controller may vary depending on the system. The controller can transmit cam-
era control commands via an RS-485 line or a coaxial cable. A time lapse VTR (VCR), alarm sensors and a video monitor can
be connected to the controller.

FEATURES

The WV-CU161C offers the following features when used with a combination camera.

• Pan/tilt control: Manual Pan/Tilt Slow ON/OFF, Auto Panning ON/OFF, Sequence Sort/Random
• Lens control: Iris, Zoom, Focus with Auto-focus
• Preset position memories: Up to 64 positions including HOME
• Patrol: Learning/Play
• Image selection: Color/Black and White
• Alarm control: Suspension ON/OFF, Reset

Note:

The WV-CU161C will not perform audio communications even if an audio board is installed in the connected Receiver.

Summary of Contents for WVCU161C - SYSTEM CONTROLLER





































Reviews:

No comments

Brands by name

Popular brands

Load more brands