-6-
■
Audio Circuit Signal
1. Connect a coaxial cable between the S-VIDEO OUT or
VIDEO OUT connector of the camera or VTR and the
S-VIDEO IN or VIDEO IN connetor of the monitor.
2. Connect a coaxial cable between the AUDIO OUT con-
nector of the camera or VTR and the AUDIO IN con-
nector of the monitor.
3. Connect a coaxial cable between the AUDIO IN con-
nector of the audio amplifier and the AUDIO OUT con-
nector of the monitor.
INPUT A
INPUT B
VIDEO
IN
AUDIO
IN
VIDEO
IN
AUDIO
IN
OUT OUT
OUT OUT
S-VIDEO
IN
OUT
FOCUS
TL
■
Cable Information
Power Cable
1. Keep the power switch in the OFF position during
installation.
2. Connect the power cord to a grounded electrical out-
let.
Video Cable
Follow these cautions to prevent from changing the imped-
ance of the cable and causing poor picture quality.
1. Use 75
Ω
coaxial cable RG-59/U (3C-2V), RG-6/U (5C-
2V), RG-11/U (7C-2V), or RG-15/U (10C-2V).
Cable lengh between camera and monitor are shown
below.
Type of
coaxial cable
Recommended
maximum
cable length
(m)
250
500
600
800
825
1 650
1 980
2 640
(ft)
RG-59/U
(3C-2V)
RG-6/U
(5C-2V)
RG-11/U
(7C-2V)
RG-15/U
(10C-2V)
S-Video Output
Audio Output
Video Output
Amplifier
Speaker
AC Outlet
Camera
VTR
2. Up to 10 monitors can be hooked up in this configura-
tion before signal loss occurs. Total cable length
should not exceeded 150m.
3. Wiring Precautions:
• Do not bend coaxial cable into a curve whose radius is
smaller than 10 times of its diameter.
• Never crush or pinch the cable.
Summary of Contents for WVCM1470 - COLOR MONITOR
Page 11: ... 53 ...