32
t
Attach the base cover (accessory) that was
removed according the steps in page 19.
y
Use the bit for tamperproof screw (accessory)
to tighten the fixing screws provided on both
sides of the base cover (accessory).
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
x
Detach the enclosure from the main
body by loosening the three fixing
screws.
Loosen the three fixing screws by using the bit
for tamperproof screw (accessory).
IMPORTANT:
• Do not hold the inner dome when carrying the
camera. Otherwise, the camera part may fall
and it may damage the camera.
• Because the inner dome is non-detachable, do
not detach it when installing this product.
• Remove the cover film from the transparent part
of the dome cover after the installation is com-
plete. Do not touch the dome cover by hand
directly after removing the cover film.
%DVHFRYHUƄ[LQJVFUHZ
Base cover
(accessory)
Summary of Contents for WV-SW559
Page 47: ...47 ...