[Image quality]
Select the quality for H.264 images to be recorded from the following.
Low(Motion priority)/ Normal/ Fine(Image quality priority)
•
Default:
Normal
Note
•
When “Constant bit rate” is selected for “Recording priority”, this setting is available.
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 1 second) to refresh the H.264 images to be recorded from the
following.
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s
•
Default:
1s
SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD memory card will be displayed.
Depending on the status of the SD memory card, the size indications will differ as follows.
Indication
Description
--------KB/--------KB
No SD memory card is inserted. Failed to obtain available capacity
due to error, etc.
********KB/********KB
The SD memory card is unformatted, or locked, etc.
Note
•
When “Off” is selected for “Overwrite” and the available size of the SD memory card has reached “0
KB”, images will not be saved on the SD memory card. When the notification function is on, a notification
E-mail will be sent to the registered addresses when the SD memory card becomes full.
(
®
page 125, page 126)
[Format]
To format the SD memory card, click the [Execute] button.
IMPORTANT
•
Before formatting the SD memory card, it is necessary to select “Use” for “SD memory card” on the
[SD memory card] tab of the “Basic” page (
®
page 57) and “Off” for “FTP periodic image
transmission” on the [FTP img. trans.] tab of the “Network” page (
®
page 181).
•
Use the SD memory card after formatting it using the [SD memory card] tab. If using the SD memory
card that has not been formatted on the [SD memory card] tab, the following functions may not work
correctly.
–
Save/obtain images that failed to transmit to the FTP server using the FTP periodic image
transmission function
–
Save/obtain alarm images
–
Save/obtain images saved manually
–
Save/obtain images in accordance with the schedule settings
–
Save/obtain the alarm logs, the manual/schedule logs, the FTP error logs and the system logs
–
Save/obtain images recorded using the SD memory recording function of Panasonic network disk
recorder
–
Play/download images on the SD memory card
64
Operating Instructions
10 Configure the basic settings of the camera [Basic]
