Symptom
Cause/solution
Reference
pages
The power cable insulation is
damaged.
The power cable and connectors are worn out.
This may result in electric shock or a fire.
Unplug the power cable from the AC outlet immediately, and refer
to qualified service personnel.
–
The power cable, plug and
connectors get hot during
use.
The power cable gets hot
when bent or stretched.
It is hard to see images with
the camera when there are
raindrops on the dome cover.
SW396A
SW395A
The effectiveness of the rain wash coating may have been
reduced. Refer to "Cleaning this product body" in "Precautions for
use" and clean the dome cover. If the situation does not improve
contact your dealer.
10
About the live indicator
The live indicator will light or blink as follows depending on the camera status.
Operation status
Indicator status
When the power is turned on
Before the network
connection is established
Blinks orange
When the network
connection is established
Blinks orange
Blinks green
Lights green
During the standby or connection (Cable is not connected.)
Lights orange
During the standby or connection (Cable is connected.)
Lights green
During the upgrade process
Blinks orange
During the initialization
Blinks orange
Lights off
Port forwarding error caused by the UPnP function
Blinks orange (in 2 seconds intervals (on for 1 second /
off for 1 second))
Trouble happening on the camera
Blinks red
Failure in writing data on the SDHC/SD memory card
Lights red
34
