background image

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is 

intended to alert the user to the presence 

of uninsulated "dangerous voltage" within 

the product's enclosure that may be of 

sufficient magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an equilater-

al triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

•  Apparatus shall be connected to a mains socket outlet with 

a protective earthing connection.

•  The mains plug or an appliance coupler shall remain readily 

operable.

•  The apparatus should not be exposed to dripping or 

splashing and that no objects filled with liquids, such as 

vases, should be placed on the apparatus.

•  All work related to the installation of this product should be 

made by qualified service personnel or system installers.

•  For PERMANENTLY CONNECTED APPARATUS provided 

neither with an all-pole MAINS SWITCH nor an all-all pole 

circuit breaker, the installation shall be carried out in accor-

dance with all applicable installation rules.

•  The connections should comply with local electrical code.

Power disconnection. Unit with or without ON-OFF switch-

es have power supplied to the unit whenever the power 

cord is inserted into the power source; however, the unit is 

operational only when the ON-OFF switch is in the ON 

position. Unplug the power cord to disconnect the main 

power for all units.

The  model  number  and  serial  number  of  this  product 

may be found on the surface of the unit.

You  should  note  the  model  number  and  serial  number 

of this unit in the space provided and retain this book as 

a  permanent  record  of  your  purchase  to  aid  identifica-

tion in the event of theft.

 

Model No. 

  Serial No.

NOTE:  This  equipment  has  been  tested  and  found  to 

comply with the limits for a Class A digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interfer-

ence  when  the  equipment  is  operated  in  a  commercial 

environment.  This  equipment  generates,  uses,  and  can 

radiate  radio  frequency  energy  and,  if  not  installed  and 

used  in  accordance  with  the  instruction  manual,  may 

cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely 

to cause harmful interference in which case the user will 

be  required  to  correct  the  interference  at  his  own 

expense.

FCC Caution: To assure continued compliance, (example 

- use only shielded interface cables when connecting to 

computer or peripheral devices). Any changes or modifi-

cations not expressly approved by the party responsible 

for compliance could void the user’s authority to operate 

this equipment.

For U.S.A

For U.S.A

This Class A digital apparatus complies with Canadian ICES-

003.

For Canada

UL listed model No.:

WV-SW395

Wij  verklaren  als  enige  aansprakelijke,  dat  het  product  waarop  deze 

verklaring betrekking heeft, voldoet aan de volgende normen of andere 

normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 

2006/95/EC en 2004/108/EC.

Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som  denne 

deklaration  omhandler,  er  i  overensstemmelse  med  standarder  eller 

andre  normative  dokumenter  i  følge  bestemmelserne  i  direktivene 

2006/95/EC og 2004/108/EC.

Vi  deklarerar  härmed  vårt  fulla  ansvar  för  att  den  produkt  till  vilken 

denna deklaration hänvisar är i överensstämmelse med de standarder 

eller andra normativa dokument som framställs i direktiv nr 2006/95/EC 

och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus 

koskee,  noudattaa  seuraavia  standardeja  tai  muita  ohjeellisia 

asiakirjoja,  jotka  noudattavat  direktiivien  2006/95/EC  ja  2004/108/EC 

säädöksiä.

Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som  denne 

erklæringen  gjelder  for,  er  i  overensstemmelse  med  følgende  normer 

eller  andre  normgivende  dokumenter  som  følger  bestemmelsene  i 

direktivene 2006/95/EC og 2004/108/EC.

We declare under our sole responsibility that the product to which this 

declaration  relates  is  in  conformity  with  the  standards  or  other 

normative  documents  following  the  provisions  of  Directives  2006/95/

EC and 2004/108/EC.

Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a 

cui  si  riferisce  la  presente  dichiarazione  risulta  conforme  ai  seguenti 

standard  o  altri  documenti  normativi  conformi  alle  disposizioni  delle 

direttive 2006/95/CE e 2004/108/CE.

Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich 

diese  Erklärung  bezieht,  mit  den  folgenden  Normen  oder  normativen 

Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 

2006/95/EC und 2004/108/EC.

Nous déclarons sous notre propre responsabilité que le produit auquel 

se réfère la présente déclaration est conforme aux normes spécifiées 

ou à tout autre document normatif conformément aux dispositions des 

directives 2006/95/CE et 2004/108/CE.

Nosotros  declaramos  bajo  nuestra  única  responsabilidad  que  el 

producto a que hace referencia esta declaración está conforme con las 

normas  u  otros  documentos  normativos  siguiendo  las  estipulaciones 

de las directivas 2006/95/CE y 2004/108/CE.

For U.S. and Canada:

WV-SW395

For Europe and other countries:

WV-SW395E

This product contains CR Coin Cell Lithium Battery which 

contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/

2

Summary of Contents for WV-SW395









































Reviews: