15
About the initial set button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing the button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
Major operating controls
Enclosure
Dome cover
SD memory card slot
Network cable
Built-in
microphone
Lens
Initial set button
SD memory card
error indicator
(lit when data
cannot be saved)
Link indicator
(lit when linking)
Access indicator
(lit when accessing)
<Front view>
<Rear view>
