background image

41

Installation Guide (this document) ......................................................1 pc.
Important Safety Instructions .............................................................1 pc.
Warranty card (P model only) .............................................................1 pc.
CD-ROM*

1

 ........................................................................................1 pc.

Code label*

2

 ......................................................................................1 pc.

Lens adjuster .....................................................................................1 pc.

The following parts are used during installation procedures.
Fixing screws (M4 x 8 mm) ..............................................................3 pcs.
Installation template label ...................................................................1 pc.
Mount bracket ...................................................................................1 pc.
Tamperproof screw bit .......................................................................1 pc.
Waterproof tape .................................................................................1 pc.

  *1  The CD-ROM contains the operating instructions and different kinds of tool software programs. 
  *2  This label may be required for network management. The network administrator shall retain the 

code label. 

Standard accessories

User License Accessory (For H.264) ............................ BB-HCA8A (P model only)

BB-HCA8CE (E model, Korea*) 
* Required in Korea

Optional accessories

Summary of Contents for WV-SW155













































Reviews: