background image

2.

Enter the information of the certificate to be generated.

Item

Description

Available number of characters

[Common Name]

Enter the camera address or host name.

64 characters

[Country]

Enter the country name. (Omission is OK.)

2 characters (Country code)

[State]

Enter the state name. (Omission is OK.)

128 characters

[Locality]

Enter the locality name. (Omission is OK.)

128 characters

[Organization]

Enter the organization name. (Omission is OK.)

64 characters

[Organizational
Unit]

Enter the unit name of the organization. 
(Omission is OK.)

64 characters

[CRT key]

Displays the key size and generation time & date
of the current key.

Note

The available characters for [Common Name], [State], [Locality], [Organization], [Organizational
Unit] are 0-9, A-Z, a-z and the following marks.
- . _ , + / ( )

When entering the IPv6 address for “Common Name”, put the address in brackets [ ].

Example:

 [2001:db8::10]

3.

Click the [OK] button after entering the items.

The self-signed certificate will be generated.

Note

The information of the generated self-signed certificate will be displayed on “Self-signed
Certificate” - “Information”.
Depending on the status of the self-signed certificate, the following are displayed.

Indication

Description

Not generated

The self-signed certificate are not generated.

Invalid (Reason: CA Certificate installed)

The self-signed certificate has already been
generated, and the certificate issued by CA has
been installed.

In this case, the server certificate is validated.

Common name of the self-signed
certificate

The self-signed certificate has already been
generated and validated.

Operating Instructions

63

10 Configure the basic settings of the camera [Basic]

Summary of Contents for WV-SFV130

















































































































































































































Reviews: