2 Monitor images on a cellular phone/mobile
terminal
2.1 Monitor images on a cellular phone
It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone.
IMPORTANT
•
When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (
®
page 144)
•
If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
•
The following are the resolutions that can be displayed depending on “Image capture mode”.
Image capture mode type
Image capture mode
Image capture size
1 Monitor (Max. 30 fps)
2M Panorama [16:9]
640x360
320x180
1M Panorama [16:9]
2M Double Panorama [16:9]
1M Double Panorama [16:9]
1.3M Fisheye [4:3]
VGA
QVGA
1.3M Quad PTZ [4:3]
1.3M Single PTZ [4:3]
2 Monitor (Max. 15 fps)
Pa Quad PTZ
Quad PTZ, Single PTZ:
VGA
QVGA
Pa Single PTZ
Double Pa Quad PTZ
Panorama, Double Panorama:
640x360
320x180
Double Pa Single PTZ
Quad stream (Max. 30 fps)
VGA Quad streams [4:3]
-
3M Fisheye (Max. 15 fps)
3M Fisheye [4:3]
-
Note
•
It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (
®
page 154)
1.
Access to “http://IP address/mobile”
*1
or “http://Host name registered in the DDNS server/mobile” using a
cellular phone.
→
Images from the camera will be displayed.
24
Operating Instructions
2 Monitor images on a cellular phone/mobile terminal
