19
z
Remove the dome cover fixing screw (M3,
step screw, x1).
x
Rotate the dome cover counterclockwise
two steps, and align the indication "OPEN"
to the maker of the camera to detach the
dome cover.
Note:
• Before the camera is installed, the dome
cover can be removed more easily when
putting a finger over the opening on the
bottom of the camera.
Detaching the dome cover
Detach the dome cover from the camera by removing the dome cover fixing screw.
SF336
SF335
SF332
The following procedure is required when using WV-SF336, WV-SF335 or WV-SF332. Refer to
page 20 when using WV-SF346 or WV-SF342.
Important:
• After removal, retain the dome cover fixing screw so as not to lose. The screw is required when
attaching the dome cover. (
☞
Page 36)
• Remove the cover film from the dome section of the dome cover after the installation is com-
plete. Do not touch the dome section by hand directly after removing the cover film.
Dome cover fixing screw
(M3, step screw)
LOCK
ADJUST
OPEN
ADJUST
OPEN
LOCK
Marker
Dome
cover
Dome alignment
indication
"OPEN"
Dome section
ADJUST
OPEN
LOCK
