background image

13

Turn the power off when cleaning of this 
product. 

Failure to observe this may cause injury. 

[Precautions for use]

This product is designed to be used 
indoors. This product is not operable out-
doors. 

This product has no power switch. 

When  turning  off  the  power,  turn  off  a  circuit 
breaker. 

To keep on using with stable performance

Do not use this camera in hot and humid con-
ditions for a long time. 
Failure to observe this causes component deg-
radation resulting in life shortening of this prod-
uct. 
Do  not  expose  this  camera  to  direct  heat 
sources such as a heater. 

Do not touch the dome cover with your 
bare hands. 

A dirty dome cover causes deterioration of pic-
ture quality. 

Handle this camera with care. 

Do  not  drop  this  camera,  nor  apply  shock  or 
vibration to this camera. 
Failure to observe this may cause trouble. 

About the PC monitor

Displaying  the  same  image  on  a  CRT  type 
monitor for a long time may damage the moni-
tor. It is recommended to use a screen-saver. 

When an error is detected, this product 
will restart automatically. 

This  product  will  be  inoperable  for  around  2 
minutes after the restart just as when the power 
is turned on. 
     

Product disposal/transfer

Images  saved  on  the  SDHC/SD  memory  card 
may lead to personal information leakage. 
When  it  is  necessary  to  dispose  or  give  this 
product  to  someone,  even  when  for  repair, 
make  sure  that  there  is  no  data  on  the  hard 
disk drives. 

Cleaning this product body

Be sure to turn off the power before cleaning. 
Do  not  use  strong  abrasive  detergent  when 
cleaning this camera. Otherwise, it may cause 
discoloration. 

Cleaning the lens

Use a lens cleaning paper (used to clean cam-
era lenses or lenses of spectacles). When using 
solvent, use an alcohols solvent and do not use 
a thinner or a glass cleaner. 

Transmission interval

Image transmission interval may become slow 
depending  on  the  network  environment,  PC 
performance,  shooting  subject,  access  num-
ber, etc. 

About SDHC/SD memory card

  •  Before  inserting  the  SDHC/SD  memory 

card,  turn  off  the  power  of  this  product 
first.  Otherwise, it may cause malfunction 
or  damage  data  recorded  on  the  SDHC/
SD  memory  card.  Refer  to  page  24  for 
descriptions  of  how  to  insert/remove  an 
SDHC/SD memory card. 

  •  When  using  an  unformatted  SDHC/SD 

memory card, format it using this camera. 
Recorded  data  on  the  SDHC/SD  memory 
card will be deleted when formatted. If an 
unformatted SDHC/SD memory card or an 
SDHC/SD  memory  card  formatted  with 
other devices is used, this product may not 
work properly or performance deterioration 
may  be  caused.  Refer  to  the  Operating 
Instructions  (PDF)  for  how  to  format  a 
SDHC/SD memory card. 

Summary of Contents for WV-SF330 Series

















































Reviews: