background image

WARNING:

•  To prevent injury, this apparatus must be securely attached 

to the wall/ceiling in accordance with the installation instruc-

tions.

•  To prevent fire or electric shock hazard, do not expose this 

apparatus to rain or moisture.

•  The apparatus should not be exposed to dripping or 

splashing.

•  All work related to the installation of this product should be 

made by qualified service personnel or system installers.

•  The installation shall be carried out in accordance with all 

applicable installation rules.

•  The connections should comply with local electrical code.

CAUTION:

•  Any changes or modifications not expressly approved by 

the party responsible for compliance could void the user’s 

authority to operate the equipment.

The  model  number  and  serial  number  of  this  product 

may be found on the surface of the unit.

You  should  note  the  model  number  and  serial  number 

of this unit in the space provided and retain this book as 

a  permanent  record  of  your  purchase  to  aid  identifica-

tion in the event of theft.

 

Model No. 

  Serial No.

NOTE: This equipment has been tested and found to com-

ply  with  the  limits  for  a  Class  A  digital  device,  pursuant  to 

Part 15 of the FCC Rules. These limits are designed to pro-

vide  reasonable  protection  against  harmful  interference 

when  the  equipment  is  operated  in  a  commercial  environ-

ment.  This  equipment  generates,  uses,  and  can  radiate 

radio  frequency  energy  and,  if  not  installed  and  used  in 

accordance with the instruction manual, may cause harmful 

interference to radio communications.

Operation of this equipment in a residential area is likely to 

cause  harmful  interference  in  which  case  the  user  will  be 

required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example - 

use only shielded interface cables when connecting to com-

puter or peripheral devices). Any changes or modifications 

not expressly approved by the party responsible for compli-

ance could void the user’s authority to operate this equip-

ment.

For U.S.A

For U.S.A

CAN ICES-3(A)/NMB-3(A)

For Canada

For U.S. and Canada (UL Listed model):

WV-SC588

For Europe and other countries:

WV-SC588

This product contains CR Coin Cell Lithium Battery which 

contains Perchlorate Material - special handling may apply.

See 

www.dtsc.ca.gov/hazardouswaste/perchlorate

/

We declare under our sole responsibility that the product to which 

this  declaration  relates  is  in  conformity  with  the  standard  or  other 

normative document following the provisions of Directive 2004/108/

EC.

Wij verklaren als enige aansprakelijke, dat het product waarop deze 

verklaring betrekking heeft, voldoet aan de volgende norm of ander 

normatief  dokument,  overeenkomstig  de  bepalingen  van  Richtlijn 

2004/108/EC.

Wir  erklären  in  alleiniger  Verantwortung,  daß  das  Produkt,  auf  das 

sich  diese  Erklärung  bezieht,  mit  der  folgenden  Norm  oder 

normativen  Dokument  übereinstimmt.  Gemäß  den  Bestimmungen 

der Richtlinie 2004/108/EC.

Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som  denne 

deklaration  omhandler,  er  i  overensstemmelse  med  standard  eller 

andre  normative  dokumenter  i  følge  bestemmelserne  i  direktiv 

2004/108/EC.

Nous  déclarons  sous  notre  propre  responsabilité  que  le  produit 

auquel  se  réfère  la  présente  déclaration  est  conforme  á  la  norme 

spécifiée  ou  à  tout  autre  document  normatif  conformément  aux 

dispositions de la directive 2004/108/CE.

Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken 

denna  deklaration  hänvisar  är  i  överensstämmelse  med 

standarddokument eller annat normativt dokument som framställs i 

direktiv 2004/108/EC.

Nosotros  declaramos  bajo  nuestra  única  responsabilidad  que  el 

producto a que hace referencia esta declaración está conforme con 

la norma u otro documento normativo siguiendo las estipulaciones 

de la directiva 2004/108/CE.

Ilmoitamme  yksinomaisella  vastuullamme,  että  tuote,  jota  tämä 

ilmoitus  koskee,  noudattaa  seuraavaa  standardia  tai  muuta 

ohjeellista  asiakirjaa,  jotka  noudattavat  direktiivin  2004/108/EC 

säädöksiä.

Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto 

a  cui  si  riferisce  la  presente  dichiarazione  risulta  conforme  al 

seguente  standard  o  altro  documento  normativo  conforme  alle 

disposizioni della direttiva 2004/108/CE.

Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som  denne 

erklæringen  gjelder  for,  er  i  overensstemmelse  med  følgende  norm 

eller  andre  normgivende  dokumenter  som  følger  bestemmelsene  i 

direktiv 2004/108/EC.

For Europe

For U.S.A

2

Summary of Contents for WV-SC588









































Reviews: