Panasonic WV-SC588 Installation Manual Download Page 18

Page: 18 / 40

Examples of when using the optional brackets to install the camera

Ceiling mount bracket

WV-Q105

Ceiling embedding bracket

WV-Q126A

Wall mount bracket

WV-Q119

IMPORTANT:

• Before starting the installation/connection, prepare the required devices and cables. Before starting the connection,

turn off the power of the devices including the camera and the PC or disconnect from the 12 V DC power supply.

• Remove the cover film from the lens after the installation is complete.
• When using 12 V DC power supply, strip 3 mm to 7 mm {1/8 inches to 9/32 inches} from the end of the wire, and

twist the stripped part of the wire sufficiently to avoid short circuit, before installing the camera and connecting the
cables (

☞

page 22).

• Be sure to install the safety wire to prevent a fall of the camera resulting in injury or accidents.

Summary of Contents for WV-SC588









































Search results

Summary of Contents for WV-SC588

Reviews:

Related manuals for WV-SC588

Brands by name

Popular brands

Panasonic WV-SC588, Installation Manual

Search results

Summary of Contents for WV-SC588

Reviews:

Related manuals for WV-SC588

Brands by name

Popular brands