manualshive.com logo in svg

Panasonic WV-SBV111M, Operating Instructions Manual

Share
Download
Panasonic WV-SBV111M Operating Instructions Manual Download Page 94

5.

Click the [Confirm] button.

→

The image (“H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)”) that the [Confirm] button was pressed for
is displayed. When a window is newly opened and about 3 seconds pass, the currently outputted bit
rate can be confirmed with the configured VIQS.

IMPORTANT

•

No setting contents are determined unless the [Set] button is clicked.

•

To check the image after configuring VIQS, display an H.264 image on the “Live” page, or press the
[Confirm] button under “Stream”.

•

The outputted bit rate changes depending on the subject. Confirm the bit rates with actual subjects
used when operating the camera.

94

Operating Instructions

11 Configure the settings relating to images [Image]

Summary of Contents for WV-SBV111M









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands