manualshive.com logo in svg

Panasonic WV-SBV111M, Operating Instructions Manual

Share
Download
Panasonic WV-SBV111M Operating Instructions Manual Download Page 50

[Set]

When an SD memory card with no configured password is inserted, a password can be configured using the
[Set] button.

[Password]/[Retype password]

Enter the password.

•

Available number of characters:

 4 - 16 characters

•

Unavailable characters:

 " &

•

Default:

 None (blank)

[Remove]

When an SD memory card with a configured password is inserted, the password can be removed using the
[Remove] button.

[Password]

Enter the password.

•

Available number of characters:

 4 - 16 characters

•

Unavailable characters:

 " &

[Change]

When an SD memory card with a configured password is inserted, the password can be changed using the
[Change] button.

[Old password]/[New password]/[Retype new password]

Enter the password.

•

Available number of characters:

 4 - 16 characters

•

Unavailable characters:

 " &

[Status]

Display the configuration status of the password lock.

•

Lock:

 A password is configured on the SD memory card, and the lock function is enabled.

50

Operating Instructions

10 Configure the basic settings of the camera [Basic]

Summary of Contents for WV-SBV111M









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands