background image

10

Install this product in a location high 
enough to avoid people and objects from 
bumping the product. 

Failure to observe this may cause injury. 

Do not install this product in locations 
subject to vibration.

Loosening of mounting screws or bolts may 
cause a fall of the product resulting in injury or 
accidents.

Correctly perform all wiring

Short circuits in the wiring or incorrect wiring 
may cause fire or electrical shock.

Install the product securely on a wall or a 
ceiling in accordance with the installation 
instructions.

Failure to observe this may cause injury or 
accidents.

Turn the power off when cleaning this 
product. 

Failure to observe this may cause injury.

Do not touch the metal part of the bottom 
side of the product.

The metal part of the bottom side may become 
hot while the product is in use. Direct skin con-
tact with high-temperature parts of the product 
may cause burns.

[Precautions for use]

When the product is accessible from the 
Internet

To prevent unauthorized access, note the fol-
lowing.

  •  Leave user authentication turned on.

  •  Periodically change passwords that are 

used to access the product. 
Refer to the Operating Instructions on the 
Panasonic support website for information 
about how to change passwords.

To keep on using with stable performance

Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this 
causes component degradation resulting in life 
shortening of this product. Do not expose this 
product to direct heat sources such as a heater.

S3131

S3111

This product is designed to be used 
indoors.This product is not operable out-
doors.

S3131

S3111

Make sure that the product does not
become wet.

Keep this camera away from water and mois-
ture.

This product has no power switch.

When turning off the power, disconnect the
Ethernet cable from the PoE device or turn off
the power of the PoE device.

Handle this product with care.

Do not drop this product, nor apply shock or 
vibration to the product. Failure to observe this 
may cause trouble. 

About the battery

A battery is installed inside the camera. Do not 
leave the battery exposed in environments of 
excessive heat as a result of sunlight or fire.

S3531

S3511

S3532

S3512

Do not subject dome cover to strong 
impact.

Doing so may cause damage or immersion.

Do not touch the dome cover with your 
bare hands.

A dirty dome cover causes deterioration of pic-
ture quality.

When an error is detected, this product 
will restart automatically. 

This product will be inoperable for around 2 
minutes after the restart just as when the 
power is turned on.

Summary of Contents for WV-S3511L

































Reviews: