24
Insert / remove an SD memory card
【2】
Attach the enclosure to the camera.
When removing an SD memory card, reverse the procedure.
To remove the SD memory card, hold down the SD ON/OFF button for about 2 seconds.
When the flashing SD MOUNT indicator goes out, you can remove the SD memory card.
Note:
Refer to the Operating Instructions on the provided CD-ROM for further information about the
SD memory card settings.
■
Insert an SD memory card
【１】
Remove the enclosure from the camera, insert an SD memory card fully into the SD memory
card slot until a click is heard.
Insert the SD memory card with its
label facing down
After the SD memory card has been
inserted, press the SD ON/OFF button,
and make sure the SD MOUNT indica-
tor is continually lit.
If you do not press the SD ON/OFF
button after inserting the SD memory
card, the SD MOUNT indicator is auto-
matically lit approximately 5 minutes
later.
■
Remove an SD memory card
Note:
When using an SD memory card, format it using this product. Recorded data on the SD memory
card will be deleted when formatted. If an unformatted SD memory card or an SD memory card
formatted with other devices is used, this product may not work properly or performance deteri-
oration may be caused. Refer to the operating instructions on the provided CD-ROM for how to
format an SD memory card.
When some SD memory cards are used with this product, the product may not work properly or
performance deterioration may be caused. Use the compatible SD memory cards. (
☞
page 32)
SD memory card
(with label facing down)
IMPORTANT:
Before turning off the camera power switch, make sure that the SD MOUNT indicator is
turned off. If you turn off the camera power switch while the SD MOUNT indicator is lit or
flashing, the recorded data may be corrupted or damaged.
*
WV-S2231L / WV-S2131L / WV-S2131 / WV-S2211L / WV-S2111L only
* This illustration represents WV-S2111L
