17
A
RJ45 (female) Network cable
Connect an Ethernet cable (category 5e or better) to the network connector.
IMPORTANT:
Use all 4 pairs (8 pins) of the Ethernet cable.
Make sure that the PoE device in use is compliant with IEEE802.3af standard.
When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
■
Cables
A
RJ45 (female) Network cable
B
12 V DC power
supply terminal
C
Audio input cable (white)
D
Audio output cable (black)
E
4P alarm cable
(accessory)
B
2P power
cable
(accessory)
E
Alarm input/output cable
Ethernet
cable (category 5e
or better, straight)
12 V DC (red)
GND (black)
F
MONITOR OUT terminal
(factory shipment: NTSC monitor)
* This illustration represents WV-S1511LN
