Vertical Stand
Instructions
Model No.
WV-Q201
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
NM0107-0 3TU001696AAA Printed in Japan
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
For European and other fields:
Matsushita Electric Industrial Co., Ltd.
Osaka, Japan
http://panasonic.net
For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company,
Unit Company of Panasonic Corporation of North America
Security Systems
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office:
Three Panasonic Way 2H-2, Secaucus,
New Jersey 07094
Zone Office
Eastern:
Three Panasonic Way, Secaucus, New Jersey 07094
Central:
1707 N. Randal Road, Elgin, IL 60123
Southern:
1225 Northbrook Parkway, Suwanee, GA 30024
Western:
6550 Katella Ave., Cypress, CA 90630
Panasonic Canada Inc.
5770 Ambler Drive,Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales Company
Division of Panasonic Puerto Rico Inc.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
Features
Precautions
The vertical stand WV-Q201 is designed to set the network disk recorder WJ-ND200 in the vertical
position.
Before starting installation, carefully read the installation guide of the WJ-ND200 and keep the fol-
lowing.
• Make sure that the power of the unit is turned off.
• Place the unit on an even surface. Otherwise, it may cause the unit to fall down, resulting in
injuries.
Installations
Follow the instructions while referring to the illustrations.
z
Remove the two screws on the
right side of the WJ-ND200.
(The vertical stand cannot be
mounted on the left side of
WJ-ND200.)
x
Fit the two projections on the verti-
cal stand to the two holes on the
right side of the WJ-ND200.
Standard Accessories
Instructions (this document) .......................................... 1pc.
The following is for installation.
Fixing screw (M4 x 10) ............................................... 2 pcs.
Specifications
Dimensions
150 mm (W) x 43 mm (H) x 267 mm (D)
{5.91" (W) x 1.69" (H) x 10.51" (D)}
Weight
Approx. 435
g
{0.96 lbs.}
c
Fix them firmly using the two pro-
vided fixing screws (M4 x 10).
v
With the right side (vertical stand)
down, place the WJ-ND200 in the verti-
cal position on an even place.
Fixing screw (2 pcs.)
Projections
Holes
Fixing screws (accessories)
