11
Align the “OPEN” mark of the camera with
e
the protrusion of the camera attachment.
LOCK
OPEN
FRONT
TO
P
Protrusion
Engage the camera with the camera
attachment.
Rotate the camera in the arrow direction so
r
that the protrusion of the camera attach-
ment is aligned with the “LOCK” position to
eliminate any backlash between the cam-
era and camera attachment.
LOCK
OPEN
Enclosure
Protrusion
Use the driver bit (supplied with the camera)
t
to loosen the screws that secure the cam-
era enclosure and remove the enclosure
from the camera main body.
Secure the camera to the camera attach-
ment with the camera fixing screw (red).
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
IMPORTANT:
The camera fixing screw shall be securely
•
tightened. Otherwise, water exposure may
cause damage or malfunction of camera, or
camera dropping may result in injury.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
Adjust the camera.
y
Refer to the manual of the camera.
Use the driver bit (supplied with the camera)
u
to tighten the screws that secure the cam-
era enclosure and mount the enclosure on
the camera main body.
Camera fixing screw
