7
5. Mount the safety wire angle (accessory) on the 2nd anchor bolt and connect the safe-
ty wire (accessory) to the angle.
q
Disconnect the safety wire from the
safety wire angle.
w
Engage the face marked
q
with the
anchor bolt.
e
Bend the face marked
w
.
r
Connect the safety wire to the safety
wire angle again.
Note:
To use the anchor bolt that was already installed, the use of 2 spacer nuts is helpful.
6. Connect the mounting base to the tip
of the safety wire.
Spacer nuts
Safety wire
Spacer nuts
Safety wire angle
Existing anchor bolt
Upper side
Lower
side
Safety wire
w
Insert
q
Disconnect
e
Bend
Mark
w
Mark
q
r
Connect
Safety wire angle
Anchor bolt
Safety wire (Accessory)
Mounting base
Insert the mounting
base into the hole
Roof space
